Misc

(100 Pack) 45mm twin retaining clips100 Pack of 45mm twin Plug Retaining Clips

(100 Pack) 41mm single 90 degree plug right/left retaining clips100 Pack of 41mm single Plug Retaining Clips (90 degree right/left)

(100 Pack) 29mm single 90 degree plug right/left retaining clips100 Pack of 29mm single Plug Retaining Clips (90 degree right/left)

(100 Pack) single PDU outlet retaining clips. Refer to the below drawing to estimate approximate dimensions or contact us with your cord specifications for a recommended clip size.

Chatsworth 31470-112 Cable Runway 12"H Standoff Kit - Allows the attachment of cable runway 12" (300 mm) directly above and either parallel or perpendicular to existing Cable Runway. Each kit...

Chatsworth 11314-001: 90°; Runway Splice Kit is designed to butt-splice 1-1/2" Cable Runway at a 90° angle. Kit includes:(2) 90°; outside clamps(2) Inside edge clamps(2) 3/8-16" trimmed round head,...

Chatsworth 11313-701: 45°; Runway Splice Kit is designed to butt-splice 1-1/2" Cable Runway at a 45°; angle. Kit includes: (2) 45°; outside clamps (2) Inside edge clamps (2) 3/8-16" trimmed round...

Chatsworth 11302-001 90°; Junction-Splice Kit (Gold) is used to create a 90°; junction splice with all types of 1-1/2" x 3/8" or 2" x 3/8" Cable Runway. Please note, 90°; Junctions should be mounted...

Ladder Butt-Splice Kit - Connect two sections of runway together end-to-end. Fits both solid and tubular steel 1-1/2" x 3/8" and 2" x 3/8". Chatsworth 11301-001 Kit Includes:(4) Splice plates(2)...

Heavy Duty Butt-Splice Kit - For splicing two lengths of Runway together. Cable Runway drilling is required. Bolt through Butt-Splice Kit for earthquake areas. Chatsworth 11299-701 Kit Includes:(4)...

Chatsworth 11298-701 Heavy Duty 90°; Junction-Splice Kit (Black) - Bolt-through Junction-Splice Kit for vertical runs or to meet seismic requirements. Cable Runway drilling is required. Please note,...

Chatsworth 10616-701: Adjustable Junction Splice Kit (Black) - Adjusts to form any horizontal junction angle (i.e. 45°;, 90°;) for cabling that requires a large radius bend or to route around...

Junction Swivel Splice Kit 3/8 x 1 1/2"; GoldChatsworth 10488-001 Junctions Swivel Splice Kit (Gold) - Splices cable runway perpendicularly. Adjusts to any angle, not limited to 45°; or 90°;...

Pack of 25, WhiteChatsworth 13392-E12 Cable Pathway Dividers, Pack of 25 (White) - divide Cable Runway into multiple cable pathways in order to organize cables according to media type or destination...

For 18"W Cable Ladders, Glacier WhiteChatsworth 12115-E18 Movable Ladder Cross Member (Glacier White) - Permits the dropping of cables at any point between cross members of 18"W Cable Runways...

Cable Runway Radius DropMounts to the side stringer or cross memberof CPI Cable Runway to help maintain properCategory 5e/6/6a or fiber bend radius. Cross Member Radius Drop (P/N 12100-XXX)fits 6,...

Chatsworth 11700-E24 Ladder End Bar Kit, Glacier White - used to close an unspliced end of a 24"W Cable Runway. Made of 3/8" x 1-1/2" x .065" thick rectangular steel tubing. Kit Includes: (1) End...

Covers and protects exposed ends of cable runway and auxiliary framing bar and channel. Reduces chances ofpersonal injury and equipment damage. Key Features and Benefits Made of fire-retardant flat...

Horizontal trim pieces are mounted on each end of a row of racks. Part of Lieberts Roof Cable Routing solution.546344G1L End Trim Piece Kit for 47"D racks is part of Lieberts roof cable routing /...

Horizontal trim pieces are mounted on each end of a row of racks. Part of Lieberts Roof Cable Routing solution.546343G1L End Trim Piece Kit for 43"D racks is part of Lieberts roof cable routing /...

The APC AR8567 is a Trough End Cap. It is an accessory designed to organize power or data cables within a rack environment. APC AR8567 Specifications: Mechanical   Height