Tool-less rack rails can be installed into racks with square holes. Rack mount equipment weighing up to 200 lbs (90.7 kgs) can be installed using a tool-less rack rail. The rack rail is 27.87" (708 mm) deep and can be installed into server racks with installation depths from 28 - 30" (711 - 762 mm) and supports equipment up to 35" (889 mm). The tool-less rack rail is made for 4-Post racks
Installs quickly into square hole, 4-Post racks
Rackmounts a variety of equipment
Tool-less rack rails install in seconds
200 lbs capacity (3U)
Dell, HP, Apple & IBM compatible
Alternative to OEM slide rails
Mounting depth from 28 - 30" (711 - 762 mm)
Tool-less, cable management bar included
Work with square hole, 4-Post racks
Image depicts a 1U, 2U, and 3U Universal Rail Kit.
Mounts in any square hole, 4-Post rack (NOT COMPATABLE WITH ROUND HOLE RACKS)
Square hole only
Mounting Depth Range
28 - 30 in. (711 - 762 mm)
Max: 17.625 in. (448 mm) Min: 16.75 in. (413 mm)
The rack rails support flange is 27.87" (708 mm) long. The rack rail will support servers computers or equipment up to 35" (889 mm) deep.
200 lbs. (90.7 kg)
Overall Install Depth
Minimum overall depth is 28" Maximum overall depth is 30"
Tool-less cabling crossbar is standard
Tool-less models do not include or require any hardware