Notes on included accessories. - Hose kit with a 25' length is provided for supplying water to the unit and to provide drain for the water outlet and condensate pump. 10' and 40' available.
- Nozzle kit is used in place of indoor air discharge grille to direct conditioned air for spot cooling. Kit consists of drop-in panel with two flex-duct nozzles.
For additional accessories, options or questions, please contact your Server Rack Online expert at 1-866-722-5776 Polaris Standard Features: - High efficiency compressors
- Electronic temperature control
- 20' lift condensate pump
- Condensate check valve/safety switch
- Dry, insulated base pan
- High efficiency condenser coil
- Water reg. valve controls water flow
- Pitched drain pan (ASHRAE 62-89)
- Manual reset hi pressure switch
- Low pressure drop through water circuit
- Schrader valves for service & testing
- Compact size
- 2-speed evap blower
- 10 foot power supply cord
- Rifled tube enhanced fin evap coil
- Washable air filters
- Heavy duty casters
- Full line of accessories
- U.L. Listed for safety
- Made in U.S.A.
OceanAire Polaris Portable Cooling Unit Dimension Diagram
NOTE: Water connections: C1 = Water In, C2 = Water Out AirBoss PWC1811 Specifications: Mechanical | | Height | (A) with Casters: 37.5 in. (95.2 cm.) (D) w/out Casters: 34.5 in. (87.6 cm) | (B) Width | 24.25 in. (61.60 cm.) | (C) Depth | 13 in. (33 cm.) | (E) Dimension | 21.5 in. (54.6 cm.) | (F) Dimension | 6 in. (15 cm.) | (G) Dimension | 4.5 in. (11.4 cm.) | Weight | 150 lbs. (68 kg.) | Shipping Weight | 170 lbs. (77 kg.) | Shipping Volume | 12 cu.ft. | Nominal Cooling Capacity1 | 18,000 | Power | | Voltage (Volts/Phase) at 60Hz | 115/1 | Unit Amps5 | 11.3 | Unit Watts5 | 1300 | In Rush Current (Amps)6 | 90 | Plug Type | 5-15P | EER | 13.8 | Compressor | | Compressor HP | 1 1/2 | Compressor RLA | 12.3 | Compressor LRA | 63 | Evap | | Evap CFM2 | 600 | Evap Motor HP | 1/8 | Evap Motor Watts | 210 | CondWater Flow (GPM) | | at 60°F inlet | 1.1 | at 85°F inlet | 4.5 | Cond Coil Pressure Drop-PSI | 0.4 | Water Valve | | Water Valve Pressure Drop PSI | 2.0 | Water Valve Connection4 | 3/8 MF | Drain (Return) Connection | 3/8 MF | Condensate Pump (ALL UNITS) | 20 Ft Lift - 3/8 MF Connection On Unit - DRAIN | Sound Level3 | 57 | R-410A Charge Oz. | 18 |
Specifications subject to change without notice: 1 Nominal capacity is total BTUH at 80ºDB/67ºWB return air, high fan speed, with 85ºEWT to 95ºLWT (3 GPM per Ton) 2 CFM with free discharge 3 Sound Pressure, dB at 5 feet, commercial operation 4 3/8” water valve on models 12, 18, 24 (with 3/8” flare fitting), 3/4” water valve on models 36, 60 (with 5/8” flare fitting) 5 Amps and Watts at 208 Volts 6 Time delay fuses/circuit breakers are recommended Ambient operating range 65º to 105º May operate down to 55º if equipped with hot gas bypass (Factory installed) |