Powerware PW5115-1500-RM Rackmount UPS Power

Eaton 5P 1440VA Line-Interactive Rackmount UPS
Eaton 5P 1440VA Line-Interactive Rackmount UPS
  • Voltage: 120V
  • Power Rating: 1440VA/1100W
  • Input: NEMA 5-15P
  • Output: (5) 5-15R
  • Form Factor: 1U Rackmount

Eaton 5PX 1440 VA Line-Interactive Rack / Tower UPS
Eaton 5PX 1440 VA Line-Interactive Rack / Tower UPS
  • Voltage: 120V
  • Power Rating: 1440VA/1440W
  • Input: NEMA 5-15P
  • Output: (8) 5-15R
  • Form Factor: 2U Rackmount or Tower

Please note, the Eaton Powerware PW5115-1500-RM (5115 UPS family) UPS has been discontinued and replaced by the Eaton 5P and 5PX series. The recommended replacement is the Eaton 5P 1500R or Eaton 5PX 1500RT. For other upgrade options please contact us.

The Powerware PW5115-1500-RM Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware PW5115-1500-RM Rackmount UPS additionally offers great UPS power protection against five of the nine common power quality problems.

PW5115-1500-RM Features and Benefits:

  • Conserves valuable space with 1U rack height
  • Doubles battery service life and gives you advanced warning of the end of useful battery life with ABM technology
  • Delivers smooth, continuous power with pure sine wave output
  • Protects your equipment from power fluctuations with Buck and Boost voltage regulation
  • Includes mounting hardware for 1U rackmount, 0U side cabinet, and bench-top installations
  • Extends backup time for select equipment with Load segments
  • Minimizes downtime with hot-swappable batteries
  • Ensures data integrity with free Software Suite bundle including LanSafe software, PowerVision software, and NetWatch
  • Integrates connectivity products such as the ConnectUPS-X Web/SNMP/xHub card easily with an option slot
  • Enhances warranty coverage with optional Gold Plan
Eaton Powerware 103003275-6591

Eaton Powerware

Powerware PW5115-1500-RM Specifications:

Electrical Input  
Nominal Voltage 120 V Models are 110 V or 120 V user-selectable; 230 V models are 220 V, 230 V or 240 V user-selectable
 Input voltage ranges for user-selectable voltages +20% for nominal voltage at full load
Operating Frequency 50/60 Hz, Auto-sensing
Frequency Range 46-65 Hz
Electrical Output  
On Utility Voltage Regulation  -10% to +6% of nominal
 On Battery voltage Regulation 5% RMS
Voltage Wave Shape (on battery) Sine Wave
Over Current Protection Electronic current limit
User Interface LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models.
Audible Alarms For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault
Network transient Protector UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection)
X-Slot Optional Communication cards ConnectUPS-X Web/SNMP/xHub Card; USB card ; Relay card
Standard Communications 1 x RS-232 Serial Port & 1 x xUSB Port
Cable 6-foot communications cable included
Power Management Software Powerware Software Suite CD-ROM (bundled with UPS)
Battery Type Sealed, lead-acid; maintenance free
Battery Replacement Hot-swappable internal batteries
 Battery Recharge  < 3 hours to 90% capacity
 Start-On-Battery Allows UPS operation without utility input
Diagnostics Self-test @ power up
Transfer Time 2-4ms typical
Overload (normal operation) 110% overload, shutdown after 3 minutes; 150% overload, shut down 10 cycles
Operating Temperature 0 to 40 C (32 to 104 F)
 Safety Markings 120 V Models: UL; cUL
230 V Models: C-Tick; CE, TUV, cUL, UL
 Safety Conformance 120 V Models: UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1)
230 V Models: UL1778, UL 497A (data line only);
cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950
 EMC Markings 120 V Models: FCC Part 15 subpart J Class A, ICES-003; 230 V Models: EN 50091-2. FCC Part 15 subpart J Class A, ICES-003
 Surge Suppression ANSI C62.41 Category A (formerly IEEE 587)
 Audible Noise  < 40 dBA typical
Altitude Up to 3000M (10,000 ft) without derating