The Avocent PM2005V-404 is a 0U Vertical 3-ph 48A 208V with IEC 309 60A, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Discount Pricing Available Call 1.866.722.5776
3.15"H x 2.2"W x 66.0"D
Avocent PM2005V-404 Close-Up View
Avocent PM2005V-404 Features:
Outlet level, phase level and strip level current metering with threshold/alert capabilities- Provides preemptive notification of any impending overload issues before they occur, and simplifies the task of installing new equipment
On board web interface- Can be installed for direct access right out of the box or it can be configured as part of a larger integrated solution using the DSView 3 software.
IP and Serial interface options- Options to install by connecting directly to the network or save IP connections by using the serial interface to connect directly to Avocent appliances already connected to the network.
Daisy chaining- Saves the number of IP addresses or console / KVM ports that are required to manage all power distribution needs.
Integration with DSView 3- Single interface for management of IT equipment and iPDU’s simplifies mapping of outlets to servers and other equipment to reduce and minimizes power cycling the wrong equipment.
Integration with DSView 3 Power Manager- Track historical trends to measure and monitor IT power consumption, capacity, and cost to understand what issues exist and to make more informed decisions in the future.
Electronic Overcurrent Protection- Electronic Overcurrent protection is an added layer of protection that gets activated in the event of minor overloads. During such events, outlets get turned off first instead of the primary overcurrent protection (OCP) getting tripped.
Sequential Startup- Protects integrity of all upstream electrical infrastructure by staggering the inrush current draw of all plugged in devices.
Sequential Shutdown- Protects integrity of applications by ensuring that multiple equipment running dependant applications shut down in the appropriate order only.
Avocent PM2005V-404 Application Diagram
Avocent PM2005V-404 Specifications:
3.15 in. (8.0 cm.)
2.2 in. (5.6 cm.)
66.0 in. (167.6 cm.)
14.8 lbs. (6.71 kg.) *without power cord
20 to 80 percent operating, 5 to 95 percent non-operating
US three phase Delta 208- 240 VAC 3W + PE 60Hz
48A per phase
Outlet Max Current
16A (C19) 12A (C13)
Bank Max Unbalanced Current
Bank Max Balanced Current
Listed Branch Circuit Protection
Number 1 Type 10/100/1000 Ethernet
Safety Markings and Approvals
UL, FCC, cUL, CE, VCCI, C-Tick, CB Safety certifications and EMC certifications for this product are obtained under one or more of the following designations: CMN (Certification Model Number), MPN (Manufacturer’s Part Number) or Sales Level Model designation. The designation that is referenced in the EMC and/ or safety reports and certificates are printed on the label applied to this product.
NOTES: *When one bank is at a maximum 32A, the other two banks shall not exceed 23A per bank.