APC NetBotz Rack Monitor 200 (NBRK0200)

Please note, the APC NBRK0200 is discontinued. For upgrade options, please contact your Server Racks Online sales representative at 1-866-722-5776.

The NetBotz 200 (NBRK0200) offers the most cost effective approach for environmental monitoring over the network. It allows you to monitor humidity, temperature, door contact and dry contact, and other environmental conditions remotely. Additional features like integration with StruxureWare Data Center Expert and user-defined alerts make the NetBotz 200 the perfect unit to protect your IT assets from environmental threats. The NetBotz 200 can be used for Network Closets to Data Centers monitoring, but it is commonly installed in Data Centers

  • Universal Sensor Ports: 6
  • Included Sensor: Temperature/Humidity (AP9335TH)
  • Sensor Pods Supported (A-Link): 12, cascaded
  • Universal Sensors Supported: 78 via Pods

Standard Lead Time: Usually in Stock

APC NBRK0200 - Click to enlarge


Rack Units1U
Dimensions1.71"H x 17.00"W x 1.70"D

NetBotz 200 Ports


  • Environmental monitoring: Prevent equipment failure from a full range of threatening environmental conditions.
  • Fault notification: Real-time event notification minimizes response times to critical physical infrastructure situations. Enables IT Administrators to reduce mean time to repair, improve efficiency, and maximize uptime.
  • Door Access monitoring: Detect access by unauthorized personnel via door switch.
  • Switched Outlet: Remote reboot equipment, or activate a connected device when configured events occur - for example, a fan may be connected to this outlet, and the outlet may be configured to turn on when a high threshold violation occurs for a temperature sensor.
  • Modbus output: Reports information from the NetBotz appliances to a third party device via RS-485.
  • Customizable Output Relays: Control output from external devices via output relay(s).
  • Adjustable threshold: Customize threshold definitions (multiple thresholds per sensor, scheduling, severity levels) to your requirements.


  • Browser Accessible: View the user interface with a browser. Provides quick access from anywhere on a secure network.
  • Password Security: User-selectable password protection prevents unauthorized access, authorized against LDAP and Active Directory servers
  • Enterprise management system compatible: Make device information available to your preferred enterprise management system by forwarding SNMP traps (events) across SNMPv1, SNMPv2 and SNMPv3 using the PowerNet MIB
  • Integrates with StruxureWare Data Center Expert: An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network


  • 4 Sensor Ports for connecting temperature, humidity, smoke, door, vibration, spot fluid, and third-party dry contact and 05 V sensors.
  • Third-party dry contact sensors require the NetBotz Dry Contact Cable (NBES0304). To connect a sensor to the cable, follow the instructions provided with the sensor and the instructions provided with the cable.
  • Standard third-party 0-5 V sensors require the NetBotz 0-5 V Sensor Cable (NBES0305). To connect a sensor to the cable, follow the instructions provided with the sensor and the instructions provided with the cable.
  • Sensor Pods (A-Link): A-Link ports are used to cascade up to twelve NetBotz Rack Sensor Pod 150s (NBPD0150) and a combined total of eight Temperature Sensors with Digital Display (AP9520T) and Temperature/ Humidity Sensors with Digital Display (AP9520TH). Provides communications and power using standard CAT-5 cabling with straight-through wiring.

NBRK0201 Package Contents

  • NetBotz Rack Monitor 200
  • 1.8-m (6-ft) IEC-320-C13 to IEC-320-C14 power cord
  • 1.8-m (6-ft) NEMA 5-15P to IEC-320-C13 power cord
  • 1/4-W, 150-ohm resistors (quantity: 2) and 1/4-W, 499-ohm resistor (quantity: 2)
  • 203-mm (8-in) hook and loop cable strap
  • Null modem, DB9F to DB9F, serial RS-232 configuration cable
  • Power cord retainer bracket
  • Brackets for a standard 19-in rack
  • 8-32 x 1/4-in Phillips-head screws
  • NetBotz Rack Monitor 200 Utility CD
  • A-Link terminator
  • 203-mm (8-in) tie wraps
  • Temperature/Humidity Sensor (AP9335TH)

Download IconAPC NetBotz 200 Installation & Configuration Manual (PDF)

NetBotz 200 (NBRK0201) Specifications

Physical Characteristics

Width17.0 in. (432mm.)
Height1.71 in. (43mm.)
Depth1.70 in. (43mm.)
Net Weight3.15 lbs (1.43 kg)
Mount Position1U Rackmount
Storage Temperature 5 - 149 F (-15 - 65 C)
Operating Temperature32 - 113 F (0 - 45 C)
Storage Humidity0 - 95%
Operating Humidity0 - 95%
Storage Elevation0-50000 feet (0-15000 meters)
Operation Elevation0-10000 feet (0-3000 meters)
Input Cords (Included)1.8-m (6-ft) IEC-320-C13 to IEC-320-C14 power cord
1.8-m (6-ft) NEMA 5-15P to IEC-320-C13 power cord
Input Voltage, Nominal100240 VAC; 50/60 Hz
Maximum total current draw10 A (defined by Switched Outlet load + 0.25 A)
Maximum output voltage for Switched OutletDefined by input voltage
Maximum output current for Switched Outlet10 A (defined by Switched Outlet load)
Voltage for Voltage Output contacts12 VDC, 24 VDC
Current for Voltage Output contacts75 mA total for 12 V or 24 V load
Current capacity of Relay Output contacts1 A, 30 V AC/DC (rated for Class 2 circuits only)
Communications & Management 
ProtocolsHTTP, HTTPS, SCP, SMTP, SNMP v1, SNMP v3, SSH V1, SSH V2, TCP/IP, Telnet
Network Interface ConnectionsRJ-45 10/100 Base-T
Approvals AS/NZS 3548 (C-Tick) Class A, cUL Listed, CE, FCC Part 15 Class A, ICES-003, Low Voltage Directive 2006/95/EC, PSE, UL Listed, VCCI Class A, VDE
REACH SVHCBis(2-ethylhexyl)phthalate (DEHP) - 0.15
Battery DirectiveCompliant
Battery NotesContains Lithium Coin Cell
Warranty2 years repair or replace