Zoom the image with the mouse
NTI E-TDS
Tamper Switch
• Orderable ⓘ
This product is available for order. Lead times vary by product and manufacturer.
A lead time will be provided after the order has been placed, or upon request before ordering.
Request Current Lead Time
Lead time and availability are subject to change without notice.
Condition:
New
Shipping:
Calculated at Checkout
$8.53
-->
- Tamper switch for drawers and alarm boxes.
- Sends activation signal when tamper switch is released.
- Silver-plated contacts ensure reliable long-term operation.
- High-impact white plastic case, screw terminals.
- Screw terminal
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- 2-wire interface.
- Compatible with E-1W, E-2D, E-5D, and E-16D Environmental monitoring systems.
- Compatible with the E-DI2-1W Digital Input Expander.
- Maximum cable length: 1,000 ft (305 m).
- Normally-open contacts at rest, closed contacts when depressed.
- Operating temperature: -13 to 158°F (-25 to 70°C ).
- Dimensions (WxDxH): 2.74x1.12x0.63 in (70x28x16 mm)
Related Products
Vendor Independent
Find the Best Solution for your Needs
BBB A+
With 25+ Years of Excellent Service