The ENVIROMUX Single-Zone Liquid Detection System monitors up to 1,640 feet (500 meters) of liquid/chemical detection sensor cable or an under carpet leak detection sensor. When the sensor detects a water or chemical leak, the system will notify you via a visual indicator (red LED) and an audible alarm.
The E-LDA-LC2 can be used to monitor important places like base stations, warehouses, libraries, museums, and industrial sites etc. for real-time water/chemical leakages. You may also use in conjunction with other equipment like air-treatment devices, refrigeration motors, liquid containers, pump tanks, etc. to help monitor leakage.
Please Note: Cable sold separately.
The E-LDA-LC2's output relay contact can be used to control a siren or beacon for local alert or for controlling valves, other devices, or automatic input systems. When wired properly, the relay can also be used to cause the E-xD to send an alert message via email, SMS, SNMP or SYSLOG. The relay only changes state if there is a water leak. The output relay can be normally-open or normally-closed, giving a level of customization
- Monitor up to 1,640 feet (500 meters) of liquid/chemical detection sensor cable or an under carpet leak detection sensor (sold separately).
- Built-in audible and visible alarm notifications.
- Siren output level: 75 dB at 1 foot.
- Silence the audible alarm using the "CLR" button.
- Red LED lights up when a leak is detected.
- Adjustable leak alarm sensitivity thresholds.
- Use as a standalone monitoring device or integrate into a larger system via the relay outputs.
- Configure for normally open or normally closed circuit connection.
- DIN-rail mountable.
- Will ship with either black or green screw terminals and labels.
Product Specifications
| Compatible sensors | |
| E-LD-LCx-y Low-Cost Liquid Detection Sensor Cable | |
| E-LDx-y Liquid Detection Sensor Cable | |
| E-CDx-y Chemical Detection Sensor Cable | |
| E-UCLD-x Under Carpet Leak Detection Sensor | |
| Dry Contact Closures | |
| One screw terminal pair for connecting a liquid/chemical detection sensor cable or an under carpet leak detection sensor | |
| Potential-free. | |
| Output Relay | |
| One screw terminal pair. | |
| Potential-free relay switch contacts. | |
| Normally open / normally closed connection points. | |
| Maximum switching load: 0.5A at 125VAC or 1A at 24VDC. | |
| Serial Interface (Currently NOT Supported) | |
| One screw terminal pair for RS485 two-wire network. | |
| (Currently NOT supported.) | |
| Dimensions | |
| WxDxH in: 1.41x4.19x2.44 (36x106x62 mm). | |
| Power | |
| One screw terminal pair. | |
| Provides +12VDC, 100mA | |
| Includes 12V, 1A power supply with country-specific line cord. | |
| Environmental | |
| Operating temperature: -4 to 122°F (-20 to 50°C). | |
| Storage temperature: -40 to 140°F (-40 to 60°C). | |
| Operating and Storage Relative Humidity: 5 to 95% non-condensing RH. | |
| Regulatory Approvals | CE, RoHS |
| Warranty | Two Years |
E-LDA-LC2 Single-Zone Liquid Detection System installation guide
E-LDA-LC2 Single-Zone Liquid Detection System Data Sheet
Related Products
Vendor Independent
Find the Best Solution for your Needs
BBB A+
With 25+ Years of Excellent Service