The InfraPower W series, 120V Intelligent Automatic Transfer Switch (iATS) offers a full-featured, Intelligent power redundancy solution for critical IT loads. The W series iATS is equipped with a 2.0" color touchscreen LCD meter to show kWh, voltage and current status.
This 120V iATS provides automatic power failover for single-corded devices. It also allows remote power input switching over IP, real-time power monitoring, and assistance with power capacity planning. Key benefits include:
| ELECTRICAL | |
| Nominal Input Voltage | 110V |
| Acceptable Input Voltage | ±10% nominal |
| Amperage | 15A or 20A |
| Input Frequency | 50/60Hz |
| Inlet | 2 x 5-15P or L5-20P |
| Outlets | 8,10, or 12 x NEMA 5-20R |
| Overload Protection | 16A or 20A hydraulic MCB |
| Transfer Time | 10 ms typical |
| Electrical Endurance | 1 x 105 operations |
| Meter Features | |
| Local Meter | 2.0" color touch LCD |
| Accuracy | ±1% Billing-grade |
| IP Access | Embedded IP with Gigabit Ethernet port Enterprise IP Authentication, LDAPv3 / LDAPS, Active Directory®, RADIUS protocol |
| SNMP | V2 / V3 & GUI |
| PHYSICAL | |
| Product | 17.4W x 11.8D x 1.7H in |
| Packing | 19.7W x 21.7D x 5.9H in |
| Net Weight | 12.5 lb |
| Gross Weight | 13.6 lb |
| Chassis Color | Dark |
| Chassis Material | Steel |
| ENVIRONMENTAL | |
| Operating Temperature | 23 to 140°F (-5 to 60°C) |
| Storage Temperature | 13 to 149°F (-25 to 65°C) |
| Operating Humidity | 8~95%, non-condensing |
| Storage Humidity | 8~95%, non-condensing |
| Operating Altitude | 0 to 2,000 m |
| Storage Altitude | 0 to 15,000 m |
| COMPLIANCE | |
| EMC | FCC 47 CFR Part 15 Subpart B, ICES-003 Issue 7 |
| Safety | CB: IEC 62368-1:2014 UL-US: UL 62368-1, 2nd Ed. UL-CA: CSA C22.2 No. 62368-1-14, 2nd Ed. |
| Environment | RoHS, Reach & WEEE |
No resources are available for this product at this time.
Request a document below.*
For information regarding orders or shipping, please visit the Ordering Information page.
*Subject to availability