Rack PDU 2G, Switched, Zero-U Vertical, 8.6kW, 208V, 21 x C13 & 3 x C19 (AP8965)

APC AP8965 Switched Rack PDU
Input: 8.6kW - 208 3PH
Input Connections: NEMA L21-30P
Cord Length: 6 feet (1.83 meters)
Output Connections: (21) C13 & (3) C19
Output: 208
Mounting: Zero-U Vertical

Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable

Standard Lead Time: Usually in Stock

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

APC AP8965 - Click to enlarge

APC
Price: $2,385.00
NOW: $1,557.47
Save: $827.53
Dimensions80.3" x 6.5" x 4.9"

APC AP8965 Specifications:

Environmental 
Operating Environment23 - 113 °F (0 - 45 °C)
Operating Relative Humidity5-95%
Operating Elevation0-10000 feet (0-3000 meters)
Storage Temperature-13 - 149 °F (-25 - 65 °C)
Storage Relative Humidity5-95%
Storage Elevation0-50000 feet (0-15000 meters)
Overload ProtectionYes
Conformance 
Regulatory ApprovalscUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A
Environmental ComplianceRoHS, REACH, PEP, EOLI, Battery Directive Compliant
Standard Warranty2 years repair or replace


APC AP8965 Features:

  • Network Management Capabilities: Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time.
  • Remote Individual Outlet Control: Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
  • Alarm Thresholds: Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
  • Local Current Monitoring: Display The aggregate current draw per rack PDU is displayed on the unit via a Load indicator LED. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
  • Power Delays: Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
  • Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)


Server Rack Cable Management
Server Rack Cable Management
Cable Management Rings, Rackmount Cable Organizers, Cable Ties, Patch Panels, Cat5 Patch Cables, Fiber Optic Cables, Power Cords
 
zLock Dual-side Locking Power Cables
zLock Dual-side Locking Power Cables
Eliminate accidental and vibration power cable disconnects - zLock is the only universal locking power cord that locks both ends.
Power Cords & Extension Power Cords
Power Cords & Extension Power Cords
Power Cords & Extension Cords available in a huge variety of connectors and cord lengths!
 
UPS Backup Power - Rack Mount & Tower UPS
UPS Backup Power - Rack Mount & Tower UPS
Off Line (Basic), Line Interactive (Intermediate), and On Line Double Conversion (Advanced) Uninterruptable Power Systems
 
Automatic Transfer Switches (ATS) - Fail-Safe Power Redundancy
Automatic Transfer Switches (ATS) - Fail-Safe Power Redundancy
Automatically switch power inputs if either in-feed goes down - Fail-Safe N+1 Power Redundancy.