Features: - Lead alloy with low calcium minimizes gassing and extends the life of the grid.
- Through unique active material recipes, plates after undergoing curing and tank formation provide outstanding energy density and ensure the quality of the battery.
- Using brass coated lead alloy battery terminals minimizes the impedance of connecting cells inside.
- The case made of ABS resin and cells kept under internal pressure protects from outer shock or impact.
- Micro-porous AGM separator completely absorbs and retains electrolyte under the pressured cell design.
- Electrolyte sufficiently serves for electrochemical reactions in battery but never spills.
- Battery cases are sealed in epoxy and cells are covered with vents to avoid cell contamination with the atmosphere and serve for internal oxygen reaction.
- With very little gas evolution, the water loss is minimized and service life is extended. Excess pressure and gas will be released which ensures safety.
- Vent design is certificated by UL.
| Battery Type | 12V, 12AH | | Capacity | | | 20 hour rate (0.60A) | 12Ah | | 10 hour rate (1.12A) | 11.20Ah | | 5 hour rate (2.03A) | 10.20Ah | | 3 hour rate (2.98A) | 8.90Ah | | 1 hour rate (7.49A) | 7.49Ah | | Dimensions | | | Length | 151mm (5.95in) | | Width | 98mm (3.86in) | | Height | 95mm (3.74in) | | Total Height | 101mm (3.98in) | | Approx Weight | 8.38 Lbs.(3.80kg) | | Current | Maximum Discharge Current
for 5 seconds: 180A | | Operating Temp Range | | | Charge | 0°c(32°f) to 40°c (104°f) | | Discharge | -15°c(5°f) to 50°c (122°f) | | Storage | -15°c(5°f) to 40°c (104°f) | | Internal Resistance | Approx. 14 mΩ | | Container Material | ABS | | Terminal | F2 |
Compatible UPS Units - Battery Cross Reference Conext: 900 AVR
Deltec: PRA 1000, PRC 1000, PRM 700,
Fenton: PowerPal L1000, PowerPal L1000X, PowerPal L1400, PowerPal L1400X
NCR: 4070-0700-7194S (700VA) | | OptiUPS: 1000ES, 1000PS, 1400E, 650E, 650ES
Parasystems: MBK 300, MPK 320, PRO 1000, PRO 2200R, PRO 700
Unisys: UP910
|
|
)
