Upsite 200-LSD-210 is a Leak Spot Detector with two 10 inch leader cables designed to work with the Upsite EMS 200 System. There are a few predictable locations for leaks to occur. If you are checking for leaks in condensation drip pans or floor drains, Upsite’s fluid spot detectors are an ideal and economical solution.
Note, a Leader Cable and EOL Terminator kit (200-LDC-015) is required for connecting to the EMS controller. Optional 15 to 100 ft. Non-sensing cables (200-NSC-xxx) can used to extend the leak spot detection cable to an area where sensing is needed.
Price: $115.00 NOW: $92.50 Save: $22.50
N/A (powered by controller)
Leader Cable (Non-sensing)
Length: 10 inches (0.25m); male & female connector Connector: 1 male, 1 female; 4 pin, 0.96in (24.4mm) diameter; connects to Upsite sensing cable cable or non-sensing cable (NSC)
Temperature: 32° to 122°F (0° to 50°C) Humidity: 5% to 95% RH, non-condensing Altitude: 15,000ft (4,572m) max.
-4° to 158°F (-20° to 70°C)
1.55"W x 2.0"H x 1.0"D (39.4mmW x 50.8mmH x 25.4mmD)
3 oz. (93g)
CE; ETL listed: conforms to UL 61010-1, EN 61010-1; RoHS compliant
Upsite EMS-200 Environmental Monitoring System 4 Sensor Inputs (temperature/humidity), 8 Digital Inputs (including motion, fire, gas detectors, door, airflow, and summary alarms), 1 Relay Output (control an external device in the event of an alarm condition), 1 Zone Leak Detection, Logging, Trending, Plug-and-Play