2 Piece Rack Conversion Kit

2-piece rack conversion kit - anchor a 2-post rack to the wall, limit the risk of the rack tipping over, or reinforce a 4-piece rack conversion kit.

The Kendall Howard 2-piece rack conversion kit is one of the handiest bracing systems on the market today. Not only do conversion kits anchor a 2-post rack to the wall, but they also limit the risk of the rack tipping over. This design will work with virtually any Telco rack on the market. Cage nut or 10-32/M6/12-24 pre-tap styles are no problem. Simply screw the conversion arms into the back of the front Telco rack and the front of the back Telco rack and you have a fully functional adjustable 4 post rack. Adjustable range is from 20"-35" (+ the width of your telco rack). If you have to move or replace a rack, the conversion kit will help keep repair costs low because patching holes typically costs significantly less than removing anchors. Whether anchoring two racks together or bracing them to the wall, the 2-Piece Conversion Kit provides a safe and dependable solution. The 2-piece rack conversion kit can also be used with the 4 piece Rack Conversion Kit to make your 4 post conversion even stronger.

Features of the 1927-3-002-00

• Provides added support to a 2-Post Rack
• Adjustable from 20" to 35"
• Only Uses 2U of Space
• Mounting hardware not included
• 19" EIA compliant
• Made in the USA
• BABA Act Compliant
• Limited Lifetime Warranty

Adjustable Depth - Each support bracket can adjust from 20″ to 32″ deep to suit your particular installation requirements.

Added Support - This easy to use bracket system adds strength and stability to any 2-post Telco rack. Whether anchoring two racks together or bracing them to a wall, the Kendall Howard Conversion Kit will provide a safer, more dependable solution.

Great Cable Lacing Option - These horizontal brackets provide a great option for securing heavy and obtrusive trunk cabling up and out of the way.

Only Uses 2U of Space - The support braces mount directly on to the vertical rack rails with standard rack hardware. Each brace requires only 2U of rack space leaving you plenty of room for your network, A/V, and other rackmount equipment.

What's in the box:

• Qty 2 - Conversion Kit Left Arms
• Qty 2 - Conversion Kit Right Arms
• Qty 2 - Conversion Kit Center Arms
• Qty 1 - Assembly Parts Pack - doesn't include hardware to mount to 2-post rack