Server Tech Temperature & Humidity Probe, 10 ft (EMTH-1-1)

Please note, the Server Technology EMTH-1-1 has been discontinued. For the direct replacement, please see theServer Technology EMTH-2-10 .

The Server Technology EMTH-1-1 is a temperature and humidity probe for switched PDUs. Users may set thresholds and remotely monitor environmentals such as temperature and humidity. SNMP and email messages are generated to alert during breached conditions. This unit is a solid state sensor and connects to one of the switched PDU's T/H ports via an RJ-11 port. These probes are on 10ft cords allowing versatile placement.

Server Technology EMTH-1-1 Features:

  • 0°C to 123.5°C Temperature Range
  • 0% to 100% Relative Humidity
  • Voltage: 208V or 110V
  • Remote monitoring
  • User defined environmental thresholds
  • SNMP and email alerting
  • RJ-11 port
  • 10 foot cord
Server Tech EMTH-1-1 - Click to enlarge


Question: Can this probe be used for flood detection? I.e will it report 100% humidity if immersed in water? And work after removed?
Answer: Thank you for your inquiry, The STI EMTH-1-1 Temp / Humidity probe does not support flood detection - it is unly able to measure 0% to 100% Relative Humidity in oxygen. Please see our Leak Detection page for leak detection solutions. If you just need Temperature, Humidity, and Leak Detection, I would recommed looking into the Falcon F200 on that page. If you would like a recommendation based on your setup, please feel free to contact your Server Racks Online sales representative directly at 1-866-722-5776, at, or via our online Chat functionality.