Motion Sensor, Wired

Upsite 200-MSW-001 Digital Motion Sensor achieves superior detection and false alarm prevention through digital signal analysis. Digital information is more accurately analyzed using software and is not subject to signal degradation caused by amplification, noise, distortion or signal clipping. 200-MSW-001 technology adapts to changing environmental conditions by adjusting critical detection parameters to provide improved consistency of detection over all temperature ranges.

Patented Multi-Level Signal Processing (MLSP) provides for more accurate detection of human IR energy over a broad range of temperatures. Itís able to maximize catch performance while providing protection against false alarm sources such as radio interference, air vents and insects.

Note, the 200-PAC-120 power supply is not included and must be purchased separately.

Upsite 200-MSW-001 - Click to enlarge

200-MSW-001 Motion Detector coverage pattern
200-MSW-001 Specifications
Dimensions3.5" H x 2.5" W x 1.87" D
Operating Voltage9.5 VDC to 14.5 VDC
Supply Voltage Ripple3.0 V PP @ 12 VDC
Standby Current15 mA @ 12 VDC
Current in Alarm18 mA @ 12 VDC
Contact Rating100 mA @ 24 VDC
Alarm Contact Resistor in Common10 Ohm 0.25 W
Operating Temperature Range-4° to 140° F (-20° to 60° C)
RF Immunity50 V/m from 0.01 to 1,200 MHz
Relative Humidity5% to 95%
Static Immunity8 kV Contact, 15 kV Air
Transient Immunity2.4 kV @ 1.2 joules
White Light Immunity20,000 Lux @ Device
Walk Detection Speed0.5 to 10 ft/s (0.15 to 3 m/sec)
Alarm Duration2 to 3 Seconds
Coverage Angle90° Minimum
Vertical Adjustment+5 to -10°
Mounting Heights6 to 10.5 ft. (1.8 to 3.2 m)
Upsite EMS-200 Environmental Monitoring System
Upsite EMS-200 Environmental Monitoring System
4 Sensor Inputs (temperature/humidity), 8 Digital Inputs (including motion, fire, gas detectors, door, airflow, and summary alarms), 1 Relay Output (control an external device in the event of an alarm condition), 1 Zone Leak Detection, Logging, Trending, Plug-and-Play

Digital Temperature Sensor, 25 ft
Digital Temperature Sensor, 25 ft
Measure Temperature within a rack -67° to 257°F, accuracy within +/- 0.125°

Digital Temperature + Humidity Sensor, 25 ft
Digital Temperature + Humidity Sensor, 25 ft
Measure Temperature and Humidity within a rack -40° to 185°F, 5% to 95% RH