SmartAire T - Controlled Automatic VAV Damper

SmartAire T is designed to provide IT technicians the ability to control the temperature of the hot aisle when access to service equipment is required. Before the tech enters the hot aisle the units are activated by a user supplied trigger. Once powered on the units allow cool plenum air to enter the hot aisle until the predetermined safe working temperature is established. When the desired temperature has been reached the tech can comfortably work in the contained aisle without breaks until they have completed their tasks. SmartAire T units will maintain this temperature until the units are deactivated by the technician.

  • Allows For 0-22.1kW Supported IT Loads
  • 2226 Cfm at 0.1" Static Pressure
  • Fail Closed Operation For 100% Closed for Minimum Hot Aisle Leakage.
  • Zero Maintenance
  • 20 Gauge Steel Construction
  • Powder Coat Finish
  • User Input for 0-10VDC Control Signal or Daisy Chain Signal from SmartAire T or P
  • Six Vane Automatic Damper Design
  • Damper Control Infinitely Variable 0-100%
  • Tool less Roll Form Stringer Attachment or Flexible Cable Hangers
  • 23.1" x 26.7" x 6.2" For Use in >12" FFH
  • 19W/VA Peak 5W/VA Typical

Tate floor panels are only compatible with Tate Raised Floor Systems. Please check your setup carefully - no returns accepted. For larger quantaties, please contact us

Tate SmartAire C/T

Please call 1-866-722-5776 to order

Download IconTate Raised Floor Systems (PDF)

SmartAire C/T - Client Controlled - Application

Increase Productivity with Longer Access to Hot Aisle Containment Systems

OSHA exposure limits for working environments indicate a certain ratio of rest and work when working in high temperatures. These regulations may suggest periods of rest that limit the amount of time a person can work. Further to the limitations provided by OSHA it is important to create a comfortable working environment as some individuals may have a lower tolerance to heat.

SmartAire C/T - Client Controlled - Application2

SmartAire C/T - Client Controlled - Application3

Airflow Performance Information (Paired with DirectAire)

CFM @ Static Pressure (in. wc)Hanger InstallCorner Lock Install
Closed100% OpenClosed100% Open

*Cooling capacities were calculated using the following formula:(CFM x Capture Index %) / 126(CFM needed to cool 1kW @ 25F ?T)= kW per rack.

SmartAire C/T - Client Controlled - Application4


  • 4 X Tool less Roll Form Stringer Hangers
  • 4 X Alternative Corner Lock Hangers
  • 4 X Corner Sealing Shrouds Installed


  • DirectAire , or DirectAire X2
  • 4 Or 16 Unit AC Power Supply
  • SmartAire Power Cable (Green)
  • Power/Control Cable (Blue) (1 per ea. SmartAire C/T Unit(s) in Daisy Chain Configuration)


  • 24" Bolted Steel System
  • 24" Wood Core Systems
  • 60CM Bolted Steel System