Medium Enterprise Environment Monitoring System - 48V DC Power

The ENVIROMUX Enterprise Environment Monitoring System monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, LEDs, alarm beacon, siren, web page, network management (SNMP), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via external USB 3G modem).

The system includes two internal sensors: temperature and humidity. It also supports five external configurable sensors, five digital input sensors, and two output relays for control of external devices.

  • This model has 48V DC Power
  • Monitor and manage server room environmental and security conditions over IP.
  • Supports IP network video cameras for live view of any facility.
  • Monitor (ping) up to 64 IP network devices.
  • Up to five units can be used together to increase the number of sensors connected.
  • Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.

Formerly the NTI ENVIROMUX-5D-48V.

NTI E-5D-48V - Click to enlarge


Price: $715.00
NOW: $657.47
Save: $57.53

Enviromux 5D Diagram

  • Monitor and manage server room environmental and security conditions over IP.
  • Sensors supported:
    • 16 external configurable sensors
    • 8 digital inputs sensitive to contact closure
    • 8 Remote Temperature/Humidity Sensors over IP
    • 3 internal sensors – temperature, humidity, power
  • Four output relays for control of external devices.
    • Relay activates upon alarm or via the user interface.
    • Control output relays via SNMP SET commands to power on/off external devices.
  • Supports IP network video cameras for live view of any facility.
    • One integrated view – see different Web cameras side-by-side with physical and environmental parameters.
    • Any programmed event can trigger a snapshot from an IP camera.
  • Monitor (ping) up to 64 IP network devices.
    • Alerts are sent if devices are not responding
  • Linux inside.
  • Available with optional small form-factor pluggable (SFP) port for connecting to a fiber optic network.
  • Create multiple alerts for any installed sensor.
  • Sensor conditions (events) can be configured to trigger alerts by themselves, and/or be used in combination with other events to trigger Smart Alerts.
    • Configure up to 50 events.
    • Setup SSH commands to be sent when events are triggered to soft shutdown or reboot machines.
    • Up to 20 Smart Alerts can be configured to use different event combinations to send alert messages.
  • Alerts are posted in message log, which is accessible through Web user interface.
  • Automatically configures network settings received from a connected DHCP server.
    • If a DHCP server is not found, the default static IP address will be used.
  • Integrates with various Open Source monitoring packages - Nagios and MRTG.
    • The unit can be polled via SNMP.
  • USB ports for connecting USB modem or for downloading log data to USB flash drive.
  • Up to five units can be connected via Ethernet connection or using CAT5 expansion cables to increase the number of sensors connected.
    • Cascade up to four ENVIROMUX-2D/5D/16D units as slaves to one ENVIROMUX-2D/5D/16D master unit via Ethernet connection.
    • Each master and slave unit needs its own unique IP address.
    • Uses a single Web interface for all systems/sensors connected.
  • 1RU rack mount case is standard.
  • The ENVIROMUX system can be mounted so that the sensor connectors are facing the front or back of the rack.
  • Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
  • Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.
RJ45 Sensor PortsFive RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors.
Provides +12 VDC, 100 mA for each port
Digital InputsFive screw terminal pairs for connecting dry contact devices.
Potential-free
Input voltage: 0VDC to +25VDC
Over-voltage surge protection
Maximum resistance to close contact: 300K Ohm
Output RelaysTwo screw terminals pairs.
Potential-free relay switch contacts.
Normally open / normally closed connection points.
Maximum switching load: 0.5A at 125VAC, 1A at 30VDC, 0.5A at 48VDC.
Alarm PortOne screw terminal pair.
Provides +12VDC, 180 mA to supply an alarm beacon or siren.
Fuse protection
AUX PowerOne screw terminal pair.
Provides +12 VDC, 500 mA.
RS232 AUX PortOne RJ45 port for connecting a serial GSM modem or a remote serially-controlled device.
USB Device PortsFour female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.
USB Console PortOne female USB Type B connector for connecting a PC for serial terminal access.
Ethernet PortOne 10/100 Base-T Ethernet port with RJ45 Ethernet connector.
Supports full- and half-duplex.
Power48VDC power
Accepts 18~72VDC (48VDC nominal).
For installation in a 48V or 24V Telecom environment.
ProtocolsHTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, LDAPv3, XOAUTH2, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0
Compatible with any SNMP management software.
Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB/RJ45 serial interface.
An IP address can be assigned to the ENVIROMUX-5D automatically by a DHCP server.
Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem).
EnvironmentalOperating temperature: 32 to 140°F (0 to 60°C)
Storage temperature: -22 to 140°F (-30 to 60°C)
Operating /Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory ApprovalsCE, RoHS
EN51055, EN50121-3-2
DimensionsWxDxH: 7.88x3x1.75 in (200x76x44 mm)
Weight: 1.0 lb (0.45 kg)


Medium Enterprise Environment Monitoring System
$565.52
Medium Enterprise Environment Monitoring System
Medium Enterprise Environment Monitoring System

Medium Enterprise Environment Monitoring System - Back Up Battery
$652.87
Medium Enterprise Environment Monitoring System - Back Up Battery
Medium Enterprise Environment Monitoring System - Back Up Battery

Medium Enterprise Environment Monitoring System - DIN Mount
$588.51
Medium Enterprise Environment Monitoring System - DIN Mount
Medium Enterprise Environment Monitoring System - DIN Mount

Medium Enterprise Environment Monitoring System - Back Up Battery, DIN Mount
$675.86
Medium Enterprise Environment Monitoring System - Back Up Battery, DIN Mount
Medium Enterprise Environment Monitoring System - Back Up Battery, DIN Mount

Medium Enterprise Environment Monitoring System - Industrial, High Temp
$809.20
Medium Enterprise Environment Monitoring System - Industrial, High Temp
Medium Enterprise Environment Monitoring System - Industrial, High Temp

Medium Enterprise Environment Monitoring System - Back Up Battery, Industrial - High Temp
$928.74
Medium Enterprise Environment Monitoring System - Back Up Battery, Industrial - High Temp
Medium Enterprise Environment Monitoring System - Back Up Battery, Industrial - High Temp