Rack Cable Ladder - Splicing & Junctions

Ladder Butt-Splice Kit

Connect two sections of runway end-to-end. Fits both solid and tubular steel 1-1/2" x 3/8" and 2" x 3/8".

• (4) splice plates
• (2) 3/8-16" trimmed head bolts
• (2) 3/8-16" hex nuts
• (2) 3/8" split lock washers

Heavy-Duty Butt-Splice Kit

For splicing two lengths of Runway together. Cable Runway drilling is required. Bolt through Butt-Splice Kit for earthquake areas.

• (4) Splice plates for 1-1/2" stringers
• (4) 3/8-16 x 1-1/4" hex cap screws
• (4) 3/8-16" hex nuts
• (4) 3/8" split lock washers

Adjustable Junction-Splice Kit

Adjusts to form any horizontal junction angle (i.e. 45°, 90°) for cabling that requires a large radius bend or to route around existing plumbing, electrical, etc. Note, only one kit is required per end of a cable ladder.

• (4) adjustable corner plates
• (2) 3/8-16 x 2" hex cap screws
• (2) 3/8-16" hex nuts
• (2) 3/8" lock washers

90° Junction-Splice Kit

Used to create a 90° junction splice with all types of 1-1/2" x 3/8" or 2" x 3/8" Cable Runway. Please note, 90° Junctions should be mounted with corner brackets.

• (4) corner clamp plates
• (2) 3/8-16" x 1 3/8" trimmed head bolts
• (2) 3/8-16" hex nuts
• (2) 3/8" split lock washers

Heavy-Duty 90° Junction-Splice Kit

Bolt-through Junction-Splice Kit for vertical runs or to meet seismic requirements. Cable Runway drilling is required. Please note, 90° Junctions should be mounted with corner brackets.

• (2) splice angles
• (4) 3/8-16 x 1-1/4" hex cap screws
• (4) 3/8-16" hex nuts
• (4) 3/8" split lock washers

Corner Brackets for 90° Junctions

Creates a radius for L, T or X-shaped intersections of Cable Runway formed when two or more pieces of Cable Runway are connected together with the Junction-Splice Kit.

• Single-piece welded assembly fabricated from 3/8" x 1-1/2" x .065" wall rectangular steel tubing
• Easy installation; brackets/hardware included

90° Runway Splice Kit

Designed to butt-splice 1-1/2" (38.1 mm) Cable Runway at a 90° angle.

• (2) 90° outside clamps
• (2) Inside edge clamps
• (2) 3/8-16 trimmed round head, square neck bolts
• (2) 3/8-16 hex nuts and lock washers

45° Runway Splice Kit

Designed to butt-splice 1-1/2" (38.1 mm) Cable Runway at a 45° angle.

• (2) 45° outside clamps
• (2) Inside edge clamps
• (2) 3/8-16 trimmed round head, square neck bolts
• (2) 3/8-16 hex nuts and lock washers

Butt Swivel-Splice Kit

Splices cable runway horizontally. Adjusts to any angle, not limited to 45° or 90°. Flexible swivel design simplifies Cable Runway installation by making it easier to route around existing plumbing, electrical, etc. Material is steel. Hardware and instructions are included.

• (8) Bracket end
• (8) 5/16-18 x 3/4" round head square, neck bolts
• (2) 5/16-18 x 1" round head square, neck bolts
• (10) 5/16-18 hex nuts, split lock washers

Junction Swivel-Splice Kit

Splices cable runway perpendicularly. Adjusts to any angle, not limited to 45° or 90°. Flexible swivel design simplifies Cable Runway installation by making it easier to route around existing plumbing, electrical, etc. Material is steel. Hardware and instructions are included.

• (4) Bracket end
• (2) bracket supports and plate clamps
• (8) 5/16-18 x 3/4" round head square, neck bolts
• (2) 5/16-18 x 1" round head square, neck bolts
• (10) 5/16-18 hex nuts, split lock washers

Vertical Swivel-Splice Kit

Splices cable runway vertically. Adjusts to any angle, not limited to 45° or 90°. Flexible swivel design simplifies Cable Runway installation by making it easier to route around existing plumbing, electrical, etc. Material is steel. Hardware and instructions are included.

• (4) Bracket end
• (2) bracket supports and plate clamps
• (6) 5/16-18 x 3/4" round head square, neck bolts
• (2) 5/16-18 x 1" round head square, neck bolts
• (8) 5/16-18 hex nuts, split lock washers

Cable Runway Standoff-Elevation Kit

Allows the attachment of cable runway 12" (300 mm) directly above and either parallel or perpendicular to existing Cable Runway. Each kit consists of the following items: two steel angle pieces, four steel brackets and eight sets of nuts, bolts and washers.