APC SmartUPS Rack Mount UPS: APC SMT3000RMT2U

APC Smart-UPS SMT3000RMT2U - 3000VA RM 2U LCD 208V

The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.

Includes: CD with software , Documentation CD , Rack mounting hardware , Rack Mounting support rails , Smart UPS signalling RS-232 cable , USB cable

APC SMT3000RMT2U - Click to enlarge

APC
Price: $1,650.00
NOW: $1,547.06
Save: $102.94

APC SMT3000RMT2U Features:
  • Adjustable voltage sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points - Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Audible alarms - Provides notification of changing utility power and UPS power conditions.
  • Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power.
  • Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
  • Boost and Trim Automatic Voltage Regulation (AVR) - Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Cold-start capable - Provides temporary battery power when the utility power is out.
  • Disconnected battery notification - Warns when a battery is not available to provide backup power.
  • Energy meter - Provides actual kilowatt hours of usage for energy conscious users.
  • Frequency and voltage regulation - Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • High online efficiency - Reduces utility costs, generates less heat.
  • Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
  • Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Intuitive LCD interface - Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
  • LED Indicators - Provide easy-to-read status of the unit and utility power conditions.
  • Network manageable - Provides remote power management of the UPS over the network.
  • Outlet group control - Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
  • Predicitive failure notification - Provides early-warning fault analysis ensuring proactive component replacement.
  • Predictive replace battery date - Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
  • Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Sequenced network shutdown and reboot - Customize network shutdown and reboot sequence of connected servers and UPSs.
  • Serial connectivity - Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
  • Single switched outlet group - Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
  • StruxureWare Central compatible - Enables centralized management via StruxureWare Central.
  • Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
  • USB connectivity - Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Wide input voltage range - Designed for harsh electrical environments to save battery life.
Mechanical 
Height 3.39 in. (86 mm.)
Width 18.9 in. (480 mm.)
Depth26.89 in. (683 mm.)
Weight97.42 lbs. (44.28 kg)
Rack Height2U
ColorBlack
Environmental 
Operating Environment 32 - 104 °F (0 - 40 °C)
Operating Relative Humidity 0 - 95%
Operating Elevation0-10000 feet (0-3000 meters)
Storage Temperature 5 - 113 °F (-15 - 45 °C)
Storage Relative Humidity 0 - 95%
Storage Elevation0-50000 feet (0-15000 meters)
Audible noise at 1 meter from surface of unit55.00 dBA
Online Thermal Dissipation348.00 BTU/hr
Output 
Output Power Capacity 2.7 KWatts / 3.0 kVA
Max Configurable Power 2.7 KWatts / 3.0 kVA
Nominal Output Voltage 208V
Output Voltage DistortionLess than 5% at full load
Waveform TypeSine wave
Output Connections (2) NEMA L6-20R (Battery Backup)
Input 
Nominal Input Voltage 208V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections NEMA L6-20P
Cord Length 8 feet (2.44 meters)
Input voltage range for main operations 141 - 255 V
Batteries & Runtime 
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement BatteryRBC43
RBC Quantity 1
Communications & Management 
Interface Port(s) RJ-45 Serial , Smart-Slot , USB
Available SmartSlot Interface Quantity 1
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) -
Surge Protection and Filtering 
Surge energy rating 320 Joules
Filtering-
Conformance 
Regulatory Approvals ENERGY STAR (USA), FCC Part 15 Class A, UL 1778
Standard Warranty 3 years repair or replace (excluding battery) and 2 year for battery
Equipment Protection Policy$150,000
Environmental Compliance RoHS, REACH, PEP, EOLI