|
Electrical Input |
|
|
Voltage |
120Vac Nominal |
| On
Line Voltage Range |
+20% for nominal voltage at full load |
|
Nominal Input Frequency |
45-65 Hz, 50/60 Hz; auto-sensing |
|
Input Protection |
Reset-able circuit breaker |
|
Connection |
6 ft. cord w/5-I5P |
|
Electrical Output |
|
|
Power Out |
1400VA / 950W |
|
Online Regulation |
-10%, +6% of nominal voltage |
|
On Battery Voltage Regulation |
+/-5% of nominal voltage; -10% after low battery warning |
|
On Battery Frequency Regulation |
+/-0.1 Hz of nominal frequency |
|
Voltage Wave Shape |
Sine wave (during normal and battery operation) |
|
Connection |
(6) 5-15R |
|
Indicators and Controls |
|
|
Front Panel LEDs |
Power on, on battery, overload, and battery fault |
|
Front Panel Buttons |
On/Off and alarm silence/self-test |
|
Communications Port |
DB9 female (UPS ships with communications cable); USB Interface Adapter
is optional |
|
Power Factor |
0.68 |
|
Battery |
|
|
Battery Type |
Sealed, maintenance-free lead-acid; starved electrolyte |
|
Battery Description |
(3) 12 V, 9 Ah |
|
Battery Recharge |
< 3 hours to 90% capacity |
|
Battery Runtime |
5 minutes minimum |
|
Start-On-Battery |
Startup with UPS batteries in absence of utility power |
|
General |
|
|
Topology |
Line-interactive |
|
Dimensions |
15.1x5.9x15.4 in. (380x150x390 mm.) |
|
Weight |
37.0 lbs. (16.8 kg.) |
|
Network Transient Protector |
In
and out RJ11 jack for telephone/modem protection (120 V models only) or
RJ45 for 10Base-T network cable; UL497A tested |
|
Environmental and safety |
|
|
Operating Temperature |
0oC to 40oC (32oF to 104oF)
UL tested at 25oC (77oF) |
|
Safety Markings |
UL, cUL, and CSA; 230V models also CE and TUV |
|
Safety Conformance |
UL 1778, CAN/CSA C22.2, No. 107.1 |
|
EMC Markings |
FCC Class B |
|
Surge Suppression |
ANSI C62.41 Category A (formerly IEEE 587) |
|
Immunity |
IEC 801-2, -3, -4 |
|
Transit/Storage Temp. |
-15oC to 55oC (5oF to 131oF) |
|
Audible Noise |
< 45 dBA typical |
| Relative
Humidity |
5-95% non-condensing |