The ENVIROMUX Mini Environment Monitoring System monitors critical environmental conditions (such as temperature, humidity, and water leakage) that could destroy network components in your server room. When a sensor goes out of range of a configurable threshold, the system will notify you via email, SNMP traps, web-page alerts, a visual indicator (red LED), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via USB 3G modem).
Monitor and manage server room environmental conditions over IP.
2 temperature/humidity sensors.
5 digital inputs sensitive to contact closure.
Sensors are hot plugable.
One output relay for control of external devices.
Supports IP network video cameras for live view of any facility.
One integrated view - see different Web cameras side-by-side with physical and environmental parameters.
Any programmed event can trigger a snapshot from an IP camera.
Monitor (ping) up to 16 IP network devices.
Alerts are sent if devices are not responding.
Two USB ports for connecting USB modem or for downloading log data to USB flash drive, and one USB console port for serial terminal interface.
Create multiple alerts for any installed sensor.
Sensor conditions (events) can be configured to trigger alerts by themselves, and/or be used in combination with other events to trigger Smart Alerts.
Alerts are posted in message log, which is accessible through Web user interface.
Automatically configures network settings received from a connected DHCP server.
Supports network security scanners.
Backup and restore system configurations.
Flexible Zero-RU mounting.
Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
Price: $305.00 NOW: $280.46 Save: $24.54
Two female RJ45 connectors for connecting temperature sensors, humidity sensors and/or combined temperature/humidity sensors.
Two levels of user-defined alerts – non-critical and critical.
Dry Contact Closures
Five screw terminal pairs for connecting dry contact devices and the liquid detection sensor.
Output voltage: +5 V DC
Current limited to 10 mA
Maximum resistance to close contact: 300K Ohm
One screw terminal pair.
Potential-free relay switch contacts.
Maximum switching load: 0.5A at 125 VAC, 1A at 30VDC
Two female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.
One female USB Type B connector for connecting a PC for serial terminal access.
One female RJ45 connector.
10/100 Base-T Ethernet interface.
WxDxH: 5.82x3x1.75 in (148x76x44 mm)
110 or 220 VAC at 50 or 60 Hz via AC adapter.
Includes 9V, 1.5A adapter.
Overvoltage and overcurrent protection in the unit and power supply.
Power consumption: 10 W
Operating temperature: 32 to 104°F (0 to 40°C).
Storage temperature: -20 to 176°F (-20 to 80°C).
Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.