Please note, the ServerTech CW-24VEK311A1 PDU has been discontinued. For replacement options, please contact your Server Racks Online sales representative.
The Server Tech CW-24VEK311A1 is the Switched 24V(C13-C19) CDU which combines remote configuration and management with power distribution, power monitoring and environmental monitoring. Reboot a single or dual-power server with one command. Receive SNMP alerts when power or environmental conditions exceed thresholds. Assign users specific access rights to designated outlets or groups. Choose one power distribution unit for your high-density cabinets.
The serial and network connections are conveniently located in the top of the unit. The power cord entry for this unit comes in from the bottom.
Only our Switched CDU products provide the flexibility needed for all data centers and remote sites, including power requirements for high-amp, high voltage; UL 60950-1 branch circuit protection; EN 60950-1:2001; SSL & SSH security; and SNMP-based input current monitoring.
*Note: Please note that the depths of these enclosures are 3.0" deep at the placement of the fuse retractors.
Discount pricing may be available!
Server Tech CW-24VEK311A1 Switched PDU Features:
Easy to use and access, secure, integral HTML Web GUI over HTTP/S, plus LDAP/S and TACACS+ external authentication and authorization support
Secure remote power management; reboot individual or grouped outlets (SSL, SSH, Telnet, SNMP, RS-232)
Outlets may be linked to one or multiple groups without loss of control of that individual outlet
Native power-up sequencing prevents in-rush current overload during initial start-up or after power loss. Unlike other products on the market, sequencing occurs during initial startup, after power loss and after user-initiated power cycling to prevent overload
True RMS input current monitor(s) on easy-to-read local LED, via network or serial connection
Optional temperature and humidity probes with 10-ft cords to allow sensors to be located in different locations
SNMP traps provide automated alerts for power and environmental conditions. Additionally, event notification is available via Syslog and email
Expandability: add additional outlets under one IP address through link unit
Local and remote notification if a branch circuit is down (FE will display on LED and through the web-based interface, SNMP and email alerts)
3 Phase products have a separate LED for each phase to simplify load balancing
*Note: Additional product specifications are below.
cTUVus – UL 60950-1-2003 CAN/CSA 22.2 No. 60950-1:2003 TUVGS – EN 60950-1:2001 FCC Class A, Part 15 CE EMC-EN 55022 Class A, EN 55024
Question: what is power-up sequencing
Answer: Thank you for your inquiry. Power-up Sequencing is simply the ability to turn on power outlets in a specific order. For instance, you may want a router to power up first, followed by a monitor then a server. Power-up sequencing allows a user to specify the order and time delays between individual outlets turning on.