NetShelter CX Mini 12U, 36"D Secure Soundproof Pre-configured Office Rack - Oak
Netshelter CX Mini AR4000MV is specifically designed to house a complete small-office IT installation comprised of one or two servers, network hardware and peripheral devices. It combines extreme noise reduction and moderate thermal capacity with exceptional reliability and an all-inclusive, plug-and-play specification. Designed to accept tower form factor servers, the CX Mini can also be converted to accept rack form factor servers using a 12U rack mount conversion kit (AR4000MV12U). The resulting EIA rack is 600 mm/23.6" deep.
Finish: Light oak veneer
Dimensions (HxWxD): 27.5 (12U) x 27.2 x 36.6 in / 700 x 690 x 930mm
Max Mounting Depth: 27.56 Inches
Integrated APC PDU: (14) NEMA 5-15 outlets, 15A, 120V (AP9567)
REACH (Contains No SVHCs), RoHS Compliant, Environmental Protection Class IP 44
Includes: Brush strip, Door , Key(s), Lockable door, Office-type Casters, Power strip with (3) IEC receptacles, Qty 1 - IEC to NEMA 5-15P power cord, Qty 1 - IEC-C13 - Shuko input power cord, Qty 2 - Fans, Qty 3 - IEC-C14 - NEMA 5-15R equipment adapter cords, Removeable lockable rear panel, Soundproofing, Unpacking sheet
Price: $2,025.00 NOW: $1,823.53 Save: $201.47
27.56"H x 27.17"W x 36.61"D
AR4000MV Standard Features
Noise reduction: 18.5 dB broadband noise reduction, measured 1.0 m / 39” in front of the enclosure (HP and Dell servers were used as noise source in noise reduction measurements)
Ventilation system: The ultra-low-noise exhaust fan module has a 800W maximum recommended total thermal load
Mobility: 4 x office style castor- wheels for ease of portability, the CX Mini can be readily moved as required.
Access: A detachable and lockable rear panel ensures security and quick access to the equipment inside. The power strip is removable to allow installation through the rear, without powering-off equipment.
Cable management: Two innovative cable-ports allow passage into and out of the enclosure for power and networking cables. The main cable port takes up to 30 cables and the upper cable port provides enough room to connect a number of devices such as keyboard, monitor, mouse or other peripherals.
Grounding: All equipment installed within a NetShelter CX should have conventional grounding via power cables, but unlike conventional metal-case cabinets, the NetShelter CX has no requirement for additional grounding in the form of ground strapping or pipe earthing etc. The enclosure shell is constructed entirely from non-conductive materials and the rack is completely isolated from outside contact.
Floor space requirements: Enclosures are designed to be placed with their back directly against a wall. Clearance of 200mm / 8” on both sides of the cabinet is essential for normal operation.
Door locking: Key operated tamper-proof lock
Warranty: 2 years
AR4000MV Features & Benefits
Built-in PDU (3 available IEC sockets + 3 NEMA Cables)
Upper & lower cable ingress points
Tamper locks on front & rear
Fully mobile on office castors
Physical rack capacity is fully EIA compliant EIA 1 ¾" /44.5 mm rack spaces Rack depth: 600mm Electrical systems are RoHS compliant
Light Oak veneer finish, blends discretely into almost any office environment
Acoustic foam lining reduces audible server and hardware noise 18dBA to normal office background levels