APC NetworkAIR PA4000 Server Room Air Conditioner

APC NetworkAIR PA4000 Replacement Filter
$69.99
APC NetworkAIR PA4000 Replacement Filter
Replacement filter for server room air conditioner
 

This product has been discontinued. The replacement for this product is the APC ACPSC3500.

The APC NetworkAIR ACPA4000 is a portable, compact air conditioner designed for spot-cooling, emergency-cooling, and after-hours cooling of server closets, data centers, conference rooms, home offices, or rooms that house heat-sensitive equipment. The ACPA4000 provides 3.8 kwh (13000 BTU/hour) of cooling power. It automatically adjusts room temperature and reduces moisture while filtering the air.

NetworkAIR PA4000 Features:

  • Electronic control panel with LCD display
  • On/Off scheduling
  • Automatic restart
  • Dual condenser ducts for inlet and exhaust
  • High-head pressure cut-out to prevent compressor damage
  • Hot gas bypass to prevent coil freeze-up
  • Automatic restart
  • Condenser ducting kit
  • Easy to install
  • Field replaceable components
  • Microprocessor controller
  • Network interface
  • On/off scheduling
  • Replacement ceiling tile
  • Self-contained design
  • Temperature/humidity probe

APC ACPA4000 Specifications:

  • Dimensions: 45.75"H x 23"W x 28.25"D
  • Shipping Weight: 342 lbs.
  • Cooling Capacity Options: 3.90 kW
  • Cooling Options: Air
  • Dehumidifier: 0.26 gal/hour
  • Compressor Type: Rotary
  • Refrigerant: R22
  • Refrigerant Charge: 2 pounds
  • Air Flow: 600 CFM
  • Condensate Pump Capacity: 1.60 gal/hour
  • Amp Draw Nominal: 14A
  • Nominal Input Voltage: 120V
  • Input Power: 1610 Watts
  • Input Frequency: 60 Hz +/- 3 Hz
  • Input Connections: NEMA 5-20P
  • Control panel: Multi-function LCD status and control console
  • Regulatory Approvals: UL Listed
APC ACPA4000 - Click to enlarge


Question: How to reset the password (forgot password) and reset to default factory settings
Answer: Thank you for your inquiry. Using Main Menu > Setup > Factory Defaults will NOT reset the password. You must enter part of the Serial Number as a 'back door'. You will use either the 3rd through the 10th digits or 5th through the 12th. ie: 'XK0412345678' would be '12345678'.